机抖激光陀螺随机噪声注入方法研究

机抖激光陀螺通过在抖动驱动信号中注入一定强度的随机噪声来消除动态闭锁误差.为了适应机抖激光陀螺小型化和其控制电路数字化的发展,设计了在以抖动驱动信号采用方波形式的基础上,其随机噪声的注入采取了应用寄存器产生的伪随机噪声-m序列按照对方波占空比进行调制的方式,并建立了抖动机构的数学模型,应用所建立的模型通过Matlab中的Simulink进行了仿真.依照随机噪声注入效率的计算方法,文中采用的方式其噪声注入效率要高于以往采用的应用高斯白噪声对交变正弦波驱动信号进行幅值调制的方式,对此进行了实验验证,证明这种随机噪声注入方式效果良好.     

等截面梁有限变形的传递函数增量算法

本文介绍了一种计算等截面梁有限变形的新方法－传递函数增量算法，它是一种半解析数值计算方法。此算法充分利用增量失空法Ｇａｕｓｓ求积公式计算非线性有限变形的特点，并将这些特点与传递函数方法，有效地结合起来，既避免了数值方法计算量大的困难，又使得求解高阶非线性微分方程的解析解成为可能，算例分析表明，这是一种易编程，计算量小，收敛快，求解精度高的行之有效的计算方法。     

结构声振研究的功率流方法

功率流方法是近年来研究柔性结构动态特性的主要手段, 其计算可分为低频段、中频段和高 频段. 本文讨论了有限元法、导纳功率流法、统计能量分析法、能量有限元法、参数化统计 能量分析法、子结构法、Lagrange乘子混合法、有限元/统计能量分析混合法、有限元/功 率流有限元混合法等方法, 各种方法适用频段各不相同, 综合应用这些方法, 可以解决绝大 多数声振预测问题.     

Noise Reduction in Non-Premixed Lifted-Jet Flames

The characteristic changes in non-premixed lifted flames when excited by hole tones from a cavity, placed in the flow path of the fuel gas, were studied. A significant reduction of the sound pressure level was observed in the low-frequency noise at the flame base of the lifted flame when the hole tones were induced in the jet. The liftoff height and the mean diameter of the flame base decreased for a given jet Reynolds number. The blow-off velocities also increased suggesting improved flame stability in the presence of the hole tones induced by the cavity. Incorporation of the cavity upstream of a burner nozzle is demonstrated to give a quieter lifted flame with improved stability characteristics. This revised version was published online in July 2006 with corrections to the Cover Date.     

激光通过散射介质的聚焦

基于角谱衍射公式和散射介质的圆形高斯分布模型,数值模拟光通过散射介质的聚焦.通过反馈优化算法实现散射光束的波前整形,在目标位置处形成一个很亮的聚焦光斑.改变聚焦目标位置后,可实现任意位置处的单点或多点聚焦.讨论了空间光调制器上的总调制单元个数、每个调制单元相位准确度与光强增长因子的关系.结果表明:目标位置处的光强随着总像素单元数的增加而线性地增强,并且随着调制单元的相位准确度的增加而增强.     

光阑对偏振高斯-谢尔模型光束偏振特性的影响（英文）

根据广义惠更斯-菲涅尔原理和Collins公式,基于复高斯函数展开法,推导出椭圆偏振的高斯-谢尔模型光束经过矩形光阑衍射后的交叉谱密度公式,结合斯托克斯矢量理论推导了椭圆偏振高斯-谢尔模型光束在接收平面的光强、偏振度、方位角和椭圆度的表达式,数值分析了光阑的孔径遮拦比对光强、偏振度及方位角和椭圆度的影响.结果表明,光阑的孔径遮拦比在近场区对经过光阑后椭圆偏振高斯-谢尔模型光束的光强和偏振特性有显著影响;随着传输距离的增大,光强和偏振特性受孔径遮拦比的影响减小,光强和偏振特性变化平稳.     

Toward automatic evaluation of defect detectability in infrared images of composites and honeycomb structures

Non-destructive testing (NDT) refers to inspection methods employed to assess a material specimen without impairing its future usefulness. An important type of these methods is infrared (IR) for NDT (IRNDT), which employs the heat emitted by bodies/objects to rapidly and noninvasively inspect wide surfaces and to find specific defects such as delaminations, cracks, voids, and discontinuities in materials. Current advancements in sensor technology for IRNDT generate great amounts of image sequences. These data require further processing to determine the integrity of objects. Processing techniques for IRNDT data implicitly looks for defect visibility enhancement. Commonly, IRNDT community employs signal to noise ratio (SNR) to measure defect visibility. Nonetheless, current applications of SNR are local, thereby overseeing spatial information, and depend on a-priori knowledge of defect’s location. In this paper, we present a general framework to assess defect detectability based on SNR maps derived from processed IR images. The joint use of image segmentation procedures along with algorithms for filling regions of interest (ROI) estimates a reference background to compute SNR maps. Our main contributions are: (i) a method to compute SNR maps that takes into account spatial variation and are independent of a-priori knowledge of defect location in the sample, (ii) spatial background analysis in processed images, and (iii) semi-automatic calculation of segmentation algorithm parameters. We test our approach in carbon fiber and honeycomb samples with complex geometries and defects with different sizes and depths.     

Active sound control in composite regions

In active sound control, noise shielding of a target region is achieved via additional sources (called controls) situated at the perimeter of the region. The sources protect the target region by adjusting the acoustic field near the boundary of the region. In the present paper a numerical model of active sound control based on surface potentials in 3D bounded composite regions is numerically studied. In the composite region setup, it is required that the regions be shielded from noise while allowing admissible sound that is generated in the shielded regions to be preserved. The admissible sound is usually required to propagate freely inside the protected regions or in a (selective) predetermined pattern. The adjusting approach used here does not require any knowledge of the sound sources or the properties of the propagation medium in order to obtain the controls. Moreover, the approach differs sharply from some other approaches where the detailed knowledge of the sound sources and the propagation medium is required. For the first time, numerical test cases involving both free communication and predetermined communication pattern between the regions in three dimensions are considered. In all test cases, these regions are effectively shielded from the noise while any present admissible sound is preserved. In addition, selective propagation of the admissible sound between the regions is enforced. The effect of the number of controls on their operation is also studied. Whether admissible sound is present or not, the level of noise cancellation decreases linearly as fewer controls are used. In addition to the increase in size of the interference zone, the controls become individually distinguishable.     

Extended Gerber–Shiu functions in a risk model with interest

We consider a compound Poisson risk model with interest. The Gerber–Shiu discounted penalty function is modified with an additional penalty for reaching a level above the initial capital. We show that the problem can be split into two independent problems; an original Gerber–Shiu function and a first passage problem. We also consider the case of negative interest. Finally, we apply the results to a model considered by Embrechts and Schmidli (1994).